If you’ve noticed your Frigidaire fridge isn’t cooling quite right or the water tastes off, it might be time to change the water filter. But how do you remove that filter without causing damage or making a mess?
You’re in the right place. This guide will walk you through simple, clear steps to take out your Frigidaire water filter quickly and safely. By the end, you’ll feel confident handling this task yourself—and keep your water fresh and clean.
Ready to get started? Let’s dive in.
Identify Your Water Filter Type
Knowing the type of water filter in your Frigidaire fridge helps with removal. Different filters fit different models and locations. Identifying the filter type saves time and avoids mistakes. Start by locating the filter inside the fridge. Then check the model number to find the exact filter type.
Locate The Filter
Open your fridge door to look for the water filter. Most Frigidaire filters sit in the upper right corner or in the base grille. Some models have the filter inside the fridge near the top shelf. Check for a round or rectangular cover that hides the filter. It may have a twist or push release.
Check The Model Number
Find the model number on the fridge label, usually inside the door frame. Write down this number to use it for filter identification. You can also find the filter model number on the filter itself. This helps confirm the correct filter type for replacement. Use this information to get the right filter for your fridge.
Gather Necessary Tools
Gathering the right tools makes removing your Frigidaire water filter easier. It saves time and prevents damage to the filter or fridge. Preparing ahead helps you work smoothly and safely.
Recommended Tools
You will need a clean cloth to catch drips from the filter. A small container or bowl works well for holding the old filter. Most Frigidaire filters twist out by hand. If it is tight, a rubber jar opener can give extra grip.
Keep a pair of gloves handy. They protect your hands and keep them clean. A flashlight helps if the filter area is dark or hard to see. These simple tools ensure the removal process goes well.
Safety Precautions
Turn off the water supply before removing the filter. This prevents leaks and water damage. Unplug the fridge to avoid any electrical issues. Handle the filter gently to avoid breaking it.
Wear gloves to keep your hands safe from sharp edges inside the filter housing. Work slowly and carefully. Stop if you feel resistance or if the filter does not move easily.
Prepare The Refrigerator
Preparing your refrigerator is the first step before removing the water filter. This step ensures safety and prevents water leaks. Taking these simple actions saves time and avoids damage.
Turn Off Water Supply
Locate the water valve behind or under the refrigerator. Turn the valve clockwise to stop the water flow. This step prevents water from spilling during filter removal.
Check if the water stops by trying the dispenser briefly. No water flow means you are ready for the next step.
Unplug The Appliance
Find the power cord at the back of the refrigerator. Pull the plug from the wall outlet gently. This action avoids electrical hazards while you work on the filter.
Do not skip this step to ensure your safety. Always handle electrical appliances with care.
Remove The Water Filter
Removing the water filter from your Frigidaire refrigerator is simple. This step is important before replacing the filter or cleaning the unit. Knowing the right method helps avoid damage and keeps your fridge working well.
Different Frigidaire models use different removal methods. Most filters come out with either a twist and pull or a push and release action. Both methods are quick and easy once you understand them.
Twist And Pull Method
Locate the water filter inside the fridge. It usually sits in the upper right corner or near the fresh food section.
Grip the filter firmly. Turn it counterclockwise about a quarter turn. You will feel it loosen.
After twisting, pull the filter straight out. Keep a steady hand to avoid dropping it.
Dispose of the old filter properly or prepare it for recycling.
Push And Release Method
Find the water filter inside your fridge. Look for a button or latch near the filter.
Press the release button firmly. This action unlocks the filter from its place.
While pressing the button, gently pull the filter out. It should slide out smoothly.
Handle the filter carefully to avoid spills or damage.
Handle The Old Filter
Handling the old water filter from your Frigidaire is a simple task. It requires care to avoid spills and keep your fridge clean. After removing the filter, focus on proper steps to manage it safely. Follow these key points to handle the old filter well.
Proper Disposal
Dispose of the old filter according to local rules. Many filters contain plastic parts that should not go into regular trash. Some areas offer recycling programs specifically for water filters. Check if your community has such options. If not, wrap the filter in a plastic bag to prevent leaks before throwing it away. Proper disposal helps protect the environment and your home.
Check For Leaks
Leaks can cause water damage inside your fridge. After removing the filter, inspect the filter housing closely. Look for any water droplets or wet spots. Use a cloth to wipe around the area. If you notice leaks, ensure the new filter fits correctly. Tighten it just enough to stop dripping, but avoid over-tightening. Regular checks help keep your fridge dry and working well.
Install A New Filter
Installing a new water filter in your Frigidaire refrigerator is easy. This step ensures clean, fresh-tasting water and ice. Follow these simple instructions to fit the new filter correctly and avoid leaks or damage.
Aligning The Filter
First, check the new filter for any protective covers. Remove these before installation. Hold the filter with the label facing out. Look for the arrows or marks on the filter and the filter housing. Match these marks carefully. Gently insert the filter into the slot. Do not force it. It should slide in smoothly when aligned correctly.
Securing In Place
Once the filter is in position, turn it clockwise. This action locks the filter securely. You will feel a slight resistance when it is tight. Do not over-tighten the filter. Stop turning as soon as it feels snug. Open the water dispenser to check for leaks. If water flows normally, the filter is properly installed.
Reset The Filter Indicator
After replacing your Frigidaire water filter, reset the filter indicator light. This step helps the fridge track the new filter. It stops unnecessary alerts and keeps your water clean and fresh.
Locate The Reset Button
Find the reset button on your fridge’s control panel. It is usually near the water filter indicator light. The button may say “Reset” or “Filter.”
Some models have a small pinhole button. Use a paperclip to press it gently.
Follow Reset Steps
Press and hold the reset button for about 3 seconds. The filter light should blink or turn off. This means the reset worked.
If the light stays on, repeat the process. Make sure you press the right button firmly. Your Frigidaire is now ready to track the new filter.
Troubleshooting Tips
Removing a water filter from a Frigidaire fridge can sometimes cause problems. This section covers common issues and simple fixes. These tips help you handle trouble quickly. Stay calm and follow each step carefully.
Filter Not Releasing
Sometimes the filter sticks and does not come out easily. Check if the filter is in the right position. Turn the filter counterclockwise gently to unlock it. Avoid using too much force to prevent damage. Clean around the filter housing to remove dirt or debris. Use a cloth to wipe the area before trying again. If the filter still won’t release, try pushing the release button firmly. This button helps unlock the filter from inside. Patience is key during this process.
Water Leaks After Replacement
Leaks may happen after putting in a new filter. Ensure the new filter matches your Frigidaire model. Insert the filter straight and push it until it clicks. A loose filter can cause water to drip. Check the O-ring seal on the filter for damage or dirt. Replace the O-ring if it looks worn out. Tighten the filter properly to avoid leaks. Run water through the dispenser for a few minutes to clear air. Watch the area closely to catch leaks early.
Frequently Asked Questions
How Do I Safely Remove A Frigidaire Water Filter?
Turn off the water supply first. Locate the filter inside the fridge. Twist the filter counterclockwise until it releases. Pull it out gently to avoid damage.
What Tools Are Needed To Remove The Water Filter?
No tools are typically required. The filter is designed for hand removal. Ensure your hands are dry to maintain grip.
How Often Should I Replace My Frigidaire Water Filter?
Replace the filter every six months. Frequent use or poor water quality may require earlier changes. Regular replacement ensures clean water and ice.
Can I Remove The Water Filter Without Shutting Off Water?
It is safer to turn off the water supply. This prevents leaks or spills during removal. Avoid potential water damage by shutting the water off.
Conclusion
Removing a water filter from a Frigidaire is simple and quick. Follow each step carefully for the best results. Keep your fridge clean and your water fresh by changing filters regularly. Doing this helps your appliance work well and keeps your water tasting good.
Now, you can handle this task with confidence and ease. No need to call for help every time. Just take your time and enjoy fresh water every day.
Hasan Al Sarker is a Reverse Osmosis Specialist. He has worked for many years to ensure safe drinking water for all. His research paper has been published in several journals, including Issue, Medium, and Slideshare. He is recognized as a water doctor among specialists though he did not attend medical college.
Besides working as a researcher of reverse osmosis technology, he is also very fancy with the kitchen and cooking. His guides are reading thousands of people every day. As a head of content, he is responsible for all the published articles at RO System Reviews.